2048L InGaAs Linescan Camera

Details

The GL2048L camera provides high-resolution line capture using 2048 pixels on 10-micron pitch for both Machine Vision and for Optical Coherence Tomography with high QE in the 1 to 1.6 micron wavelength range.  The camera covers the line rate range from 100 to >76,000 lines per second via 12-bit base Camera Link® digital interfaces providing flexibility. It can also be externally triggered over the interface to set both the line rate and exposure time via the frame grabber CC1 signal.

• Mechanical
• Dimensions

  8.3 cm x 10.2 cm x 1.6 cm (excludes I/O connectors, and lens adapter)
  3.25 in x 4 in x 0.64 in (excludes I/O connectors, and lens adapter)

• Weight

  < 240 g or 8.6 oz (no lens or adapter)

• Lens Mount

  M42x1-6H with ~6 mm to image plane.

  None, fixed distance C-Mount adapter or adjustable distance F-Mount adapter (see ordering info)                                                      

• Spectrometer Mount

  4 tapped 8-32 holes in 2 inch square pattern                                                                                              

  2 tapped 8-32 holes in-line with image axis                                                             

  O-Ring light seal, 1.9 inch diameter,  1/16th thickness

• Camera Tripod Mount

  2 tapped ¼-20 holes, one on bottom, one on side wall.

• Environmental & Power
• Operating Case Temperature

  +10°C to +35°C

• Storage Temperature

  -10°C to 60°C

• Humidity

  Non-condensing

• Power Requirements

  AC Adapter: 100-240 VAC, 47-63 Hz
  DC Voltage: +6 to 12 VDC (Maximum: 13.1 VDC)
  Typical Power: 3.6 W at 30 °C case temp
  In-rush Current: 1.25 A at 12 VDC

• Interfaces
• Control

  GL2048L: Single SDR 26-pin connector  GL2048R: Dual SDR 26-pin connectors

• Image Data

  GL2048L: Single SDR 26-pin connector  GL2048R: Dual SDR 26-pin connectors

• Power

  CUI Inc. PJ-056, 1.0mm X 3.8mm power jack

• Trigger: Input

  Via Camera Link CC1 line

• Status LED

  Green: Power on

• Regulatory Compliance
• CE

  Meets class A for emission, immunity & ESD standards, RoHS

• FCC

  Meets requirements for Part 15, Subpart B, Class A, 2006

• Export

  GL2048L-210 is exportable as EAR99, no license required

  GL2048L-010 is exportable under EAR ECCN 6A003.b.4.a

• Electro-Optical Performance
• Sensor Format ¹

  2048 pixels with 2048 readout ADCs

• Optical Aperture (pixel height) 1

  210 µm

• Quantum Efficiency ¹

  >60% 0.99 µm-1.65 µm; > 70% peak response @ 1.55  µm

• Gain Capacitor Setting (High)

  	Typical	Specification
  Net full well capacity (Me-) 2	1.1
  Gain (e-/cnt) 1,3	270
  Temporal noise (rms counts) 1,2	3.1	< 3.4
  Dynamic range 1,2		> 1200:1
  Differential non-linearity 1,2	+/- 1.1	< +/- 2.5%

• Gain Capacitor Setting (Medium High)

  	Typical	Specification
  Net full well capacity (Me-) 2	1.3
  Gain (e-/cnt) 1,3	325
  Temporal noise (rms counts) 1,2	2.2	< 2.8
  Dynamic range 1,2		> 1450:1
  Differential non-linearity 1,2	+/- 1.5	< +/- 2.5%

• Gain Capacitor Setting (Medium Low)

  	Typical	Specification
  Net full well capacity (Me-) 2	1.6
  Gain (e-/cnt) 1,3	390
  Temporal noise (rms counts) 1,2	1.9	< 2.3
  Dynamic range 1,2		> 1750:1
  Differential non-linearity 1,2	+/- 1.5	< +/- 2.5%

• Gain Capacitor Setting (Low)

  	Typical	Specification
  Net full well capacity (Me-) 2	2.1
  Gain (e-/cnt) 1,3	520
  Temporal noise (rms counts) 1,2	1.7	< 1.9
  Dynamic range 1,2		> 2100:1
  Differential non-linearity 1,2	+/- 1.5	< +/- 2.5%

• Bad Pixel Specification

  White, dark, noisy or pixels exceeding +/- 20 % of the mean value when illuminated at 50% of full well. Number of bad pixels limited to a maximum of 1% of array total; on-board pixel replacement function

• Exposure Time ^1,3

  4.5 µs to 0.1 ms, user programmed in pixel clock cycles or via the width of the ext. trigger

• Trigger Modes ³

  Free run, single line per trigger (ET set by camera), or variable exposure

• External Trigger ³

  Via CC1 signal line in Camera Link cable

• External Variable ET

  User set by the duration of trigger input signal (minimum ET pulse: 5.5 µs)

• External Trigger Jitter

  +/-1 clock cycle: nominally 25 ns

• Pixel Rate

  2048L:157 Mpix/s with 2 x 12-bit words transferred on each Camera Link strobe clock at 80 MHz
  2048R: 301 Mpix/s with 4 x 12-bit words transferred on each Camera Link strobe clock at 80 MHz

• Digital Output Format

  12-bit base Camera Link®; recommend NI PCIe-1433 or frame grabber with BW of >313 Mbytes/s

• Readout Mode

  Integrate while read, differential double sampling

• Corrections (preset OPRs)

  Factory calibrated gain, offset, and bad pixel replace.

• Resolution

  2048 x 1

• Pixel Pitch

  10 μm

• Line Rate

  76,335 lps

• Spectral Response

  0.99 to 1.61 μm

• ¹Actual formats and performance governed by pixel size options (dark current may limit longest usable ET, especially at high gain); GL2048R specs are still to be determined.
  ²Camera readout noise limited for low & medium gain settings; dark shot noise limited for high gain settings at longer exposure times.
  ³User selectable by command over Camera Link® serial lines

• Ordering Information

• Camera Model1	Part number	Max. Line rate1	Pitch	Pixels	FPA length	Aperture (height)
  GL2048L-10A-ENC-STD-210	8000-0596	76,335 lps	10 μm	2048	20.48 mm	210 μm
  GL2048R-10A-ENC-STD-210	8000-0587	145,000 lps	10 μm	2048	20.48 mm	210 μm

   

• 1. Accessory Kits: (in qty 1-4) Wall-mount power supply, lens cap, ESD foam-lined shipping box, mini-CD with manual and free SUI Image Analysis software for National Instruments Camera Link frame grabbers. Order lens adapters separately for additional charge.
  2. Part Numbers: Adjustable F-mount adapter: 8000-0171. C-mount adapter:  3800-0002

Support Documents

These commodities, technology and/or software are subject to the Export Administration Act as promulgated by the Export Administration Regulations. Diversion contrary to U.S. law is prohibited.

RTX does not assume any liability that should arise from the provision of this information in connection with national customs laws and regulations or other international trade requirements.