
High-Definition VIS/SWIR digital video camera with a 10µm pitch delivers enhanced performance for covert surveillance in low-light imaging applications.
Coming soon
The compact 1280JSX-10µm VIS/SWIR digital video camera from Sensors Unlimited features a 1.3MP high-resolution, high-sensitivity indium gallium arsenide (InGaAs) imager. Leveraging our patented GMOD pixel architecture, the next-generation HD 10µm design is ideal for persistent surveillance and laser detection while delivering enhanced performance for both low-light and daylight imaging applications.
The camera offers real-time imaging across an extended 0.5–1.7µm wavelength range. Thanks to advances in InGaAs processing and fabrication, this reduced 10µm pixel design maintains the spectral response, dynamic range, and noise performance of the previous 12.5µm generation. Mechanical, electrical, and command interfaces remain identical, enabling seamless drop-in replacement into existing systems.
A key advancement in the 1280JSX-10µm is its reduced pixel size, downsizing to a 10µm square while maintaining a 100% fill factor. This 36% decrease in active area enables the use of smaller, lighter, and more cost-effective optics without sacrificing performance.
Equipped with onboard automatic gain control (AGC) and built-in non-uniformity corrections (NUCs), the camera excels in high-dynamic range urban night environments without image blooming. It features Camera Link® digital output, delivering 12-bit images for effortless digital image processing or transmission. Its lightweight, compact design is ideal for integration into small gimbals, unmanned aircraft systems (UAS), handheld devices, and robotic platforms and for applications including battlefield surveillance, drone detection, missile and vehicle tracking, terrain analysis, resource mapping, and low-light operations through atmospheric obscurants.
Now accepting RFQs with a minimum-order-quantity (MOQ) of (10) units. For more information, please contact Sensors Unlimited at sui_contact@collins.com
- 30 or 60 frames per second full frame rate
- 1280 x 1024-pixel format, 10.0μm pitch
- Capability for 100% duty cycle across entire illumination intensity range
- High sensitivity in 0.9 to 1.7 μm spectrum; VIS/SWIR from 0.5 to 1.7 μm
- Low power, < 3.0 W at 20°C
- Partial moonlight to daytime imaging
- Compact OEM module size, < 4.5 in3
- All solid-state InGaAs imager with snapshot exposure capability
- On-board, real time non-uniformity corrections
- Digital 12-bit base Camera Link® output
- Automatic Gain Control (AGC)
- Windowing, Binning and In-Field Offset Corrections
- Operation from -40 to +70°C
- Tested to MIL-STD-810G for functional shock, vibration, thermal shock, storage temperature, altitude and humidity
- Mechanical
-
Dimensions
ENC Series: 2.0 x 2.0 x 2.43 in, 50.8 x 50.8 x 61.7 mm
OEM Series: 1.65x1.60x1.60 in, 41.9 x 40.6 x 40.6 mm -
Weight
≤ 235 g enclosed, ≤ 120 g OEM
-
Lens Mount
M42x1 mount
-
Camera Link Connector
3M SDR26 Connector enclosed
-
Pixel Pitch
10.0 μm
-
Focal Plane Array
1280 x 1024 pixels
-
Active Area
12.8 mm x 10.24 mm x 16.39 mm diagonal
- Environmental & Power
-
Operating Case Temperature
-40˚C to 70˚C
-
Storage Temperature
-54°C to 85°C
-
Humidity
95% relative humidity
-
Power Requirements
DC Voltage: +8-16V
Power: ≤ 3.0 W at 20°C (case temperature), ≤ 10.0 W maximum -
Functional Shock, Random Vibration, Thermal Shock, Temperature/Altitude/Humidity Combined, Acceleration
MIL-STD-810G compliant
- Electrical
-
Optical Fill Factor
100%
-
Spectral Response
VIS/SWIR 0.5 µm to 1.7 µm
-
Quantum Efficiency
VIS/SWIR, ≥ 65% from 0.7 µm to 1.6 µm
-
Mean Detectivity, D*
4.02 x 1013 cm√Hz/W (typical) - 30 fps
2.82 x 1013 cm√Hz/W (typical) - 60 fps -
Noise Equivalent Irradiance*
7.51 x 108 photons/cm2xs
1.53 x 109 photons/cm2xs
-
Noise (RMS)*
20 electrons (typical)
-
Dynamic Range**
1700:1 - 30 fps
1850:1 - 60 fps
-
Operability
≥ 99%
-
Exposure Times***
30 µs to 33 ms - 30 fps
30 µs to 16.5 ms - 60 fps
-
Image Correction
2-point (offset and gain) pixel by pixel, user selectable
-
Digital Output Format
12 bit base Camera Link®
-
Analog Output Format
N/A
-
Digital Output Frame Rate
30 fps or 60 fps
-
Scan Mode
Continuous or three user-selectable, externally triggered modes
-
* λ = 1.55 µm, exposure time = 33ms (30 fps), 16.5 ms (60 fps), 17°C TEC setpoint, high gain, no lens, x1 digital gain with enhancement, AGC and correction off.
** In high dynamic range OPR settings, 17°C . Able to achieve 750:1 in highest sensitivity OPR setting.
*** Standard configuration Exposure time = 200 µs in lowest sensitivity OPR setting.
- Low-light level imaging
- Covert surveillance with 24/7 operation
- Multi-laser spotting and tracking
- Imaging through atmospheric obscurants.
- Easy integration into small gimbals, unmanned aircraft systems, handheld and robotic systems.
- Driver Vision Enhancement (DVE).
Frame rate calculator
Instructions: adjust the number of rows to determine the maximum frame rate for a given window. Frame rate does not change with number of columns on this camera. However, the number of columns can be reduced for other reasons.
Max frame rates are estimated, actual results may vary.
This calculator does not contain any export controlled technical data.
Contact us to discuss your windowing needs.
Important export information
The International Traffic in Arms Regulations (ITAR) details the regulations governing the export of defense related materials and technologies. The U.S. Munitions List (USML) categorizes goods and technologies governed by the ITAR. This product is available for sale outside the United States to approved end users subject to receipt of an approved export license. Export of this product from the United States is strictly prohibited without a valid export license issued by the U.S. Department of State, Office of Defense Trade Controls as prescribed in the International Traffic in Arms Regulations (ITAR), Title 22, Code of Federal Regulation, Parts 120-130.
Violations of the ITAR are extremely serious and can result in fines, debarment, and criminal sanctions. Please direct any questions or concerns regarding the export status of your Sensors Unlimited product to your Account Manager or email us at sui_info@collins.com.
1280JSX HD 10µm | |
Export Classification: | Coming soon |
RTX does not assume any liability that should arise from the provision of this information in connection with national customs laws and regulations or other international trade requirements.